Dacrylate appointed with The Royal Warrant

Dacrylate Paints Ltd.

Dacrylate Primers
AC Universal Primer/Undercoat

AC Universal Primer/Undercoat

Reference No.:115-1

Water-borne acrylic

Interior/exterior primer/undercoat for woodwork, hardboard, chipboard, etc. May be rapidly overcoated with solvent-based and water-based decorative paints. AC Universal is a combined primer and undercoat.

Colours available: White
Appearance Of Dried Film: Matt
Application Rate: Approximately 10m² per litre - this figure will vary depending on porosity fo substrate, etc.
Drying Time At 20°C:
Touch Dry: 20 minutes
Film Dry: 1 hour
Overcoat: 1 hour with water-based coatings / 4 hours with solvent-based coatings.
(will vary with temperature, air movements, etc.)
Note: Drying times of water-based paints will vary widely depending upon humidity, air circulation, ventiliation, etc.
Packaging: 500ml, 1 litre, 2.5 litre and 5 litre containers
Shelf Life: 2 years in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C. Protect from frost.
Surface Preparation: Surface must be clean and free from oil, grease, etc. Previously painted surfaces should be lightly abraded with abrasive paper and wiped clean.
Application: Normally applied by brush or roller. May also be applied by spray - up to 10% of clean water may be added to achieve optimum application characteristics. For exterior use, 2 coats are recommended to give maximum durability.
Treatment of Knots: Water-based wood primers are essentially 'self-knotting'.
The fully dried AC Universal is unaffected by the resinous material in the knots. (Unlike oil-based primers which allow the resins in the timber to permeate through the film.)
Timber which is heavily knotted should be spot-primed with the AC Universal in the knotted areas and allowed to dry for at least 2 hours before overall priming.
Clean-up: Water - clean all equipment immediately, do not allow to dry.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange