Dacrylate appointed with The Royal Warrant

Dacrylate Paints Ltd.

Dacrylate High Performance Coatings
Acid Etch

Acid Etch

Reference No.: 150-358

Dilute solution of mineral acid

To 'etch' new concrete floor surfaces prior to application of floor paints.

Surface Preparation: Ensure floor is free from oil, grease, etc.
Application: Apply Acid Etch and spread evenly over surface. After acid reaction has ceased, thoroughly wash floor with clean water to remove any excess acid. Allow floor to dry completely before painting.
To ensure all excess acid has been removed, the concrete should be tested with pH paper and should have a reading of pH7 or above.
Special Note: This product contains acid. Use rubber gloves, eye protection, etc., to protect skin and eyes.
Storage: Under cover with temperature range of 5°C to 32°C.
Clean-up: Water
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange