Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate General Purpose Metal Coatings
QD1 Hammer Finish

QD1 Hammer Finish

Reference No.: 5H-Line

A modified alkyd with metallic and coloured pigments typically used as a decorative 'hammered' enamel finish for metalwork.

Colours available: Range of colours, see Industrial Colour Card
Appearance Of Dried Film: Sheen
Theoretical Coverage: Approximately 10m² per litre depending on film thickness applied
Drying Time At 20°C: Touch Dry: 20 minutes
Film Dry: 2 hours
Overcoat: N/A
(will vary with temperature, air movements, etc.)
Packaging: 5 litre containers
Shelf Life: 12 months in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Ensure that surfaces are clean and dry. Maybe applied direct to mild steel, however, corrosion resistance will be limited due to the low film thickness in the 'hammer' pattern.
Suitable primers: Steel Dacrylate primer.
Aluminium and other Non-Ferrous Metals: Dacrelate 2-Pack Primer.
Application: Apply by conventional spray. Addition of up to 20% of Dacrylate Thinner R11 may be required to achieve optimum spray characteristics and hammer pattern.
Clean-up: Dacrylate Thinner R11.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange