Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate General Purpose Metal Coatings
Rapidac High Sheen Black

Rapidac High Sheen Black

Reference No.: 13-71

A modified alkyd coating that is fast drying with a high sheen black industrial finish for use on mild steel components, wrough iron and similar applications.

Colours available: Black
Appearance Of Dried Film: High sheen
Volume Solids: 40%
Dry Film Thickness: Typical 40 microns
Theoretical Coverage: 10m² per litre at 40 microns
Drying Time At 20°C: Touch Dry: 20 minutes
Film Dry: 3 hours
Overcoat: See Note
(will vary with temperature, air movements, etc.)
V.O.C.: 563 grams/litre
Packaging: 5 and 20 litre containers
Shelf Life: 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Preferred method is abrasive blast to ISO 8501-1 SA2.5.
Manual clean: Chip, scrape and wire brush to remove all loose millscale, rust and similar. Degrease with Dacrylate Thinner R5.
Clean, mild steel (free of rust and millscale): Degrease with Dacrylate Thinner R5.
Application: May be applied by conventional or airless spray. Up to 10% Dacrylate Thinner R5 may be added to obtain optimum spray characteristics.
Apply to an approximate we film thickness of 100 microns to achieve 40 microns dry film thickness.
Small areas and narrow sections can be brush applied. Apply with a full wet brush, do not attempt to 'brush out' or 'lay off'.
Overcoating: Should a seconde coat of Rapidac High Sheen Black be required, this must be applied within 2 hours of the first coat to avoid lifting or wrinkling of the Rapidac High Sheen Black.
After this 2 hour period, the Rapidac High Sheen Black will require at least 10 days curing before becoming resistant to solvents in the second coat.
Overcoating and drying times will depend on ambient temperatures and especially ventilation, air movement, etc.
Clean-up: Dacrylate Thinner R5.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange