Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Masonry Coatings
Dac Flex HB Textured Coating

Dac Flex HB Textured Coating

Reference No.: 125-Line

A high build water borne acrylic with outstanding extensibility, flexibility, external durability and colour retention. Dac Flex may be applied to substrates subject to minor cracking and small amounts of movement, eg. concrete, render, plywood, timber, etc. Typical applications include masonry, portable buildings and roofing.

Colours Available: Limited range, contact us for more details.
Appearance of Dried Film: Low sheen
Volume Solids: 55% (may vary with colour)
Dry Film Thickness: Typical 275 microns / Range 220-330 microns
Theoretical Coverage: 2m² per litre at 275 microns
Drying Time At 20°C: Touch Dry: 3 hours
Film Dry: 8 hours
Overcoat: 8 hours
(will vary with temperature, air movements, etc.)
Note: Drying times of water-based paints will vary widely depending upon humidity, air circulation, ventilation, etc.
Packaging: 5 litre or 10 litre containers
Shelf Life: 12 months in unopened containers.
Storage: Under cover with temperature range of 5°C to 32°C. Protect from frost.
Surface Preparation: Remove all loose and flaking coatings back to a firm edge. Feather all edges with abrasive paper or by mechanical sanding. Ensure all surfaces are clean, dry and free from oil, grease and other contamination.
All holes, joints and cracks should be filled with suitable fillers. Unpainted substrates should be sealed with Dacrylate Clear Masonry Sealer Ref.: 150-50.
Application: Dac Flex is normally applied by brush or roller. For additional texture a proprietory 'texturing' roller can be used.
Dry film thickness will depend on surfacr profile, method of application and aesthetic texture required but as a guide Dac Flex HB should be applied at a rate of approximately 2-3 square meters per litre per coat.
Note: Dac Flex HB should not be applied in wet, damp conditions or if rain is threatened. Relative humidity should be less than 85%. Ambient temperature should be above 5°C until coating has fully dried.
Dac Flex HB can also be supplied in an airless spray grade giving a smooth flexible film.
Clean-up: Clean water
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange