Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Masonry Coatings
Dac Guard

Dac Guard

Reference No.: 121-Line

A modified acrylic emulsion typically used as an exterior masonry paoint for use on concrete, stone, render, cement sheeting, etc. Certified by Taywood Engineering as an Anti-Carbonation Coating. Certificate No. 6410 and 6411.

Colours Available: Full range to special order, contact us for more details.
Application Rate: Approximately 10m² per litre on smooth, non-porous substrates.
Note: Coverage will be less on rough-cast or similar profiled surfaces.
Drying Time At 20°C: Touch Dry: 1 hour
Film Dry: 4 hours
Overcoat: 4 hours
(will vary with temperature, air movements, etc.)
Shelf Life: 2 years or longer in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Substrate must be clean, dry and sound (remove any oil or grease with suitable cleaning solvent). Remove moss, lichen or mould with scraper and/or wire brush and treat area with 20% domestic bleach solution. Rinse well and dry off.
Dac Guard may be applied direct to bare or previously painted sound surfaces. Friable , porous substrates should be sealed with Masonry Sealer Ref.: 150-429.
Application: Brush, roller or airless spray.
Clean-up: Water - clean all equipment immediately after use.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange