Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Highways Agency Coatings
Mordant Solution Type 'T'

Mordant Solution Type 'T'

Highways Agency Item No.155

Reference No.: 150-23

Pre-treament for galvanised steel to improve adhesion of subsequent coating system.

A blend of copper carbonate, phosphoric acide, water and alcolhols complying with the BR Specification for 'T' Wash.

Theoretical Coverage: 20-25m² per litre
Drying Time At 20°C: Touch Dry: 20-60 minutes
Overcoat: As soon as surface is completely dry
(will vary with temperature, air movements, etc.)
Packaging: 1 litre, 2.5 litre, 5 litre and 25 litre plastic containers
Shelf Life: 12 months in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Degrease galvanised surface with Dacrylate Thinner R5.
Application: Apply by brush or clean degreased surface and allow to dry. Avoid excess application and 'ponding'. After drying, excess 'T' Wash should be wet-cleaned to remove surplus 'T' Wash and allowed to dry. When dry, the galvanised surface should be 'blackened'. Any areas still showing a bright galvanised surface indicates presence of contamination. Lightly abrade these areas, degrease and re-apply Mordant Solutions.
Note: On weathered galvanising the appearance after treatment may vary from black to light gre.
Clean-up: Clean brush in water.
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange