Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Flooring Products
Dacfast CR Line Marking Paint

Dacfast CR Line Marking Paint

Reference No.: 63-Line

A chlorinated rubber/alkyd fast-drying paint for line and lane marking on concrete, weathered blacktop, brick, paving andwood. Typical uses include car parks, roads, runways and factory floor demarcation.

Colours available: White, yellow and black. Other colours to special order, contact us for more information.
Appearance of Dried Film: Matt
Volume Solids: 50%
Dry Film Thickness: Typical 150 microns
Theoretical Coverage: 3.34m² per litre (up to 44 metres of 75mm width line per litre at 150 microns DFT)
Drying Time At 20°C:
Touch Dry: 10 minutes
Film Dry: 15 minutes
Overcoat: 1 hour minimum
(will vary with temperature, air movements, etc.)
Packages: 5 litre and 20 litre containers
Shelf Life: 2 years in unopened containers, when stored under cover in good storage conditions
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Ensure that surface to be coated is dry and free from oil, dust, road salts and other contaminations before application is commenced. Check compatibility with newly applied asphalt surfaces, synthetic all-weathered sports surfaces and thermoplastic line marking materials before over-coating this type of substrate. Do not apply at temperatures below 10°C or whete condensing conditions are expected.
Application: Stir thoroughly before use. Apply by airless or conventional spray, preferably by lining machine. Do not thin the coating as line definition and film build might be affected. If thinning is essential, a maximum of 10% addition of Dacrylate Thinner R30 may be added.
Ballotini beads or calcined flint may be added to the wet film surface, immediately after application, if added reflectance or skid resistance is required. An application rate of 400g per m² is recommended.
Small areas can be applied by brush, using a well loaded brush but do not attempt to brush-out the coating, or alternatively use Waymark Line Marking Paint Ref.: 150-Line.
Overcoating: Should a second coat be required, this should be applied after a minimum drying time of 1 hour has elapsed.
Clean-up: Dacrylate Thinner R30
Health and Safety: For more information request relevant Material Safety Datasheet.

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange