Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Anti-Graffiti Products
Margard Pigmented Sealer

Margard Pigmented Sealer

Reference No.: 79-Line

A water miscible epoxy typically used as a barrier coat for Margard Anti-Graffiti System. Conforms to Railtrack Line Specification RT98.

Colours available: White, for other colours please contact us
Appearance Of Dried Film: High sheen
Volume Solids: 52%
Dry Film Thickness: Typical 50 microns. Range 40-60 microns
Theoretical Coverage: 10.4m² per litre at 50 microns (coverage will be considerably reduced when used on porous concrete or brick surfaces)
Drying Time At 20°C: Touch Dry: 4 hours
Film Dry: 6 hours
Overcoat: After overnight drying but within 3 days
(will vary with temperature, air movements, etc.)
Note: To achieve the above drying times, the paint film must be exposed to adequate air movement with good ventilation. To achieve an effective cure, the paint must be applied and cured at temperatures above 10°C.
Packaging: 5 litre composite pack
Shelf Life: 2 years in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Surface must be clean and free from oil, grease, etc. On brickwork, masonry, etc., remove all dirt, dust and friable material. Previously painted surfaces must be sound with good adhesion.
Remove heavy residues of oil graffiti with Marclean GP Remover. Remove water-based graffiti by washing with dilute detergent solution followed by clean water rinse. Remove wax-based graffiti by wiping with close and Dacrylate Thinner R1.
Application: Thoroughly mix base component, add curing agent and continue stirring until completely homogeneous. May be applied by brush, roller, conventional or airless spray. 5-15% of clean water may be added to give optimum application characteristics. On substrates with a coarse profile, brush application is the preferred method to ensure full penetration and complete sealing of the surface.
Pot Life (at 20°C): 2 hours
Allow mixed product to stand for 15 minutes before use
Re-mix immediately prior to application
Clean-up: Clean water
Health and Safety: For more information request relevant Material Safety Datasheet.

 

The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange