Dacrylate Paints Ltd.

High Performance Coating Solutions

Dacrylate Anti-Graffiti Products
Margard Water Washable Graffiti System

Margard Water Washable Graffiti System

Reference No.: 4-Line

An unique single pack moisture curing polymer typically used as a permanent anti-graffiti coating with excellent water washable graffiti removal properties for concrete, brick coated metal, etc. (see Notes below). Graffiti can be simply removed by pressure washing with water to produce the original coating without the use of solvents or gels.

Colours available: Clear
Appearance Of Dried Film: Gloss 4-2
Matt 4-3
Typical Coverage Gloss: 6-8m² per litre per coat may vary depending on porosity and nature of substrate
Typical Coverage Matt: 4-6m² per litre per coat may vary depending on porosity and nature of substrate
Drying Time At 20°C: Touch Dry:1 hour
Film Dry: 2 hours
Overcoat: 4 hours minimum
(will vary with temeprature, air movements, etc.)
Packaging: 5 and 20 litre containers
Shelf Life: 6 months in unopened containers when stored under cover in good storage conditions.
Storage: Under cover with temperature range of 5°C to 32°C.
Surface Preparation: Ensure substrate is sound, clean, dry and free from any form of contamination/graffiti. If necessary prime/seal the substrate with the appropriate sealer, eg., Margard Non Darkening Sealer Ref.: 4-1.
Application: Apply two full coats by brush/roller (see notes below).
Do not overbrush or roll to ensure optimum film build and finish.
Once dried the coating will exhibit a characteristic 'rubbery' feel which indicates a suitable film build for easy graffiti removal.
Cleaning Graffiti: Small areas: Can be cleaned off using preferabley warm water and a scrubbing brush.
Large areas: Pressure washing preferably with warm water (50°C approximately) with a maximum working pressure of 1000psi.
Clean-up: Immediately with Dacrylate Thinner R1
Note 1: Once applied this material is a permanent coating and cannot be overpainted at any point other than with itself and when required to 'refresh' the coating.
Note 2: Very porous substrates may require a further application of Margard Water Washable Graffiti System.
Certain substrates may darken slightly with the coating. Margard Non Darkening Sealer Ref.: 4-1 can be applied to the substrate where the original substrate apperance needs to be retained. A trial area is always advisable to determine acceptable appearance.
For application to previously painted substrates coated with graffiti or other types of painted/unpainted substrates, please contact us for further advice.
Health and Safety: For more information request relevant Material Safety Datasheet.


The above information is general information on the product but without warranty. Since conditions of service and application are beyond our control we cannot accept claims for loss, damage etc., based on this information. Dacrylate will not accept any claim for consequential or incidental damages.

BBA     BCF     ISO 9001     Royal Society of Chemisty     HEA HEMSA     IPL     Business in the Community     PaintCare     Made in Britain     SEDEX - Supplier Ethical Data Exchange